Overview - High Beam Assist, Humidity Sensor And Lane Assist
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Front Cover
- For the housing for the Automatic High Beam Assist Control Module -J844- with Light Recognition Sensor -G399-
- Upper Cover
- For Automatic High Beam Assist Control Module -J844-
- Interior Rearview Mirror
- Vehicles with Automatic High Beam Assist Control Module -J844- with Light Recognition Sensor -G399-
- Automatic High Beam Assist Control Module -J844- with Light Recognition Sensor -G399- integrated inside the interior rearview mirror. Cannot be replaced separately if faulty.
- Replacing the interior rearview mirror, refer to INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .
- Upper Cover
- For Directional Stabilization Assistance Control Module -J759-
- Directional Stabilization Assistance Control Module -J759-
- Component location overview, refer to OVERVIEW - Directional Stabilization Assistance Control Module -J759- .
- Lower Cover
- For Directional Stabilization Assistance Control Module -J759-
- Rear Cover
- Central Connector
- Humidity Sensor -G355-
- Removing and installing, refer to Humidity Sensor -G355-, REMOVING AND INSTALLING