Driver Memory Seat Control Head -E97-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and remove the key.
-- Remove the front door trim panel, refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connector -4-.
-- Release the retaining hooks with a small screwdriver -B arrows-.
-- At the same time carefully pull the tabs -1- and -2- to the side -arrows A-.
-- Remove the Driver Memory Seat Control Head -E97- -3- from the switch mount -arrow C-.