Roof End Strip, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the trim clamps remain in the body mounting points, remove them and insert them in the trim.
Check clamps for damage or deformation, replace if necessary.
-- Mount the rear roof panel trim -1- so that the hooks touch the D-pillar trim.
-- Position the rear roof panel trim on the pins, then press on it until the clips audibly engage.