Window Frame Trim, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Install Trim Panel -2- For Window Frame On Top Starting At B-Pillar -Arrow- Into Window Frame Seal -1

Courtesy of AUDI OF AMERICA, LLC

-- Install the window frame trim -2- -arrow- into the window guide -1-.

-- Fold the window frame trim -2- over the window guide -1- ; the window frame trim must fit into the groove -arrow-.

Fig 2: Pull Window Frame Trim -2- Over Window Frame Seal -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Pull the Trim Removal Wedge 3409 the entire length between the window frame trim -1- and the door seal molding -2- and at the same time push the window frame trim toward the door frame and into the groove inside the window guide.

Fig 3: Pull 3409 Between Window Frame Trim -1- And Door Seal -2

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal.