Overview - Sill Panel Strip, Front Sill Panel Strip
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The driver side sill panel is shown in the illustration.
- Bracket
- Quantity: 4
- Insert in the trim panel
- Remove any clips still in the body using Omega Clip Tool T40280 and insert them into the sill panel strip for installation.
- Replace if damaged or deformed
- A-Pillar Gap Cover
- Removing and installing. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING, FRONT SILL PANEL .
- Release Lever
- For the cable
- Driver side only
- Removing and installing. Refer to HOOD RELEASE LEVER, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Driver side only
- Front Sill Panel Trim
- Removing and installing. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING, FRONT SILL PANEL .