Carpet, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove front seats. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Remove the rear seats. Refer to REAR SEAT, REMOVING AND INSTALLING .

-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .

-- Remove the center console bracket and lower the shift mechanism. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .

-- Remove the rear center console vent on the center tunnel. Refer to INSTRUMENT PANEL VENTS AND REAR VENTS, REMOVING AND INSTALLING .

-- Remove the front sill panel trim. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING, FRONT SILL PANEL .

-- Remove the lower B-pillar trim panel. Refer to B-PILLAR TRIM PANEL, REMOVING AND INSTALLING, LOWER B-PILLAR TRIM PANEL .

-- Remove the rear sill panel trim. Refer to SILL PANEL, REMOVING AND INSTALLING, REAR SILL PANEL .

-- Disengage the floor covering at brackets -1- and -2-.

Fig 1: Disengage Floor Covering At Brackets -1- And -2

Courtesy of AUDI OF AMERICA, LLC

-- Pull the floor covering -3- back.

NOTE:

Make sure the floor covering does not tear at the openings.

-- Fold the floor covering lengthwise and remove it through a door.