A-Pillar Trim Panel, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Do not pinch the head curtain airbag when installing the upper A-pillar trim.
Install in reverse order of removal. Note the following:
NOTE:
Always replace the clips in the center and at the bottom.
Always replace clips without hooks with clips with hooks.
-- Install the upper A-pillar trim -1- into the instrument panel mount -2- and the front sill panel trim -direction of arrow-.
-- Attach the upper A-pillar trim with the "airbag" symbol so that the clips engage.
-- Fold over the rubber lip on the door seal.