Overview - Lower Rear Lid Trim Panel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Lower Rear Lid Trim Panel

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Quantity: 4
- 2 Nm
Rubber Buffer
- Quantity: 4
- Insert in the trim panel
Bracket
- Quantity: 12
- Insert in the trim panel
- Replace if damaged or deformed
- Remove the clips that are still in the mounting points on the body using the Omega Clip Tool T40280.
Lower Trim
- For the rear lid
- Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING .
Cover
- For tail lamps
- Removing and installing. Refer to TAIL LAMP COVER, REMOVING AND INSTALLING .
Luggage Compartment Lamp
- Removing and Installing. Refer to Lamps .
Cover
- For the warning triangle
- Removing and installing. Refer to EMERGENCY TRIANGLE COVER, REMOVING AND INSTALLING .
Cover
- For the emergency release
- Removing and installing. Refer to REAR LID EMERGENCY RELEASE COVER, REMOVING AND INSTALLING .
Trim Panel
- For rear lid lock
- Removing and installing. Refer to REAR LID LOCK TRIM, REMOVING AND INSTALLING .
Rear Lid Lock Button In Luggage Compartment -E406-
- Removing and installing. Refer to Controls .