LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Interior Trim) >> 70 Interior Trim >> Luggage Compartment Trim Panels >> Luggage Compartment Cover, Assembly Overview

Luggage Compartment Cover, Assembly Overview

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Luggage Compartment Cover
GWWA70-11546Courtesy of AUDI OF AMERICA, LLC
  1. Rear Luggage Compartment Cover

    There are two different versions for the luggage compartment cover.

    Version 1: 

    • The underside is smooth and all attachments are installed. The large bolt is for installing the hinges and the small bolt for the storage net attachments.
    • To repair, there is a repair kit that contains all of the attachments (hinges, mount, attachments for the storage net and the bolts).
    • Just repair the damaged attachment on uninstalled luggage compartment covers.
    • The mounts and hinges come with positioning aids

    Version 2: 

    • The underside is made of material and, except for the D-pillar protection, all of the attachments are riveted in place.
    • Only the D-pillar can be replaced.
    • Riveted components cannot be replaced.
  2. Rail for Storage Net 2x
    • 1.6 Nm
    • Depending on the version: either bolted or riveted in place
    • Small bolt
    • The rails for versions 1 and 2 are different
  3. D-Pillar Protector 2x
    • 1.6 Nm
    • Bolted in place
    • Bolt
  4. Hinge 3x
    • 1.6 Nm
    • Depending on the version: either bolted or riveted in place
    • Large bolt
    • the two outside hinges are the same, but the center one is different
  5. Mount for the Storage Net
    • 1.6 Nm
    • Depending on the version: either bolted or riveted in place
    • Small bolt
  6. Mounts for the Storage Net
    • 1.6 Nm
    • Depending on the version: either bolted or riveted in place
    • Small bolt
  7. Small Mount 2x
    • 1.6 Nm
    • Depending on the version: either bolted or riveted in place
    • Large bolt
  8. Large Mount 2x
    • 1.6 Nm
    • Depending on the version: either bolted or riveted in place
    • Large bolt
  9. Front Luggage Compartment Cover

    There are two different versions for the luggage compartment cover.

    Version 1:

    • The underside is smooth and all attachments are installed. The large bolt is for installing the hinges and the small bolt for the storage net attachments.
    • To repair, there is a repair kit that contains all of the attachments (hinges, mount, attachments for the storage net and the bolts).
    • Just repair the damaged attachment on uninstalled luggage compartment covers.
    • The mounts and hinges come with positioning aids

    Version 2:

    • The underside is made of material and, except for the D-pillar protection, all of the attachments are riveted in place.
    • Only the D-pillar can be replaced.
    • Riveted components cannot be replaced.