Lock Carrier Trim, Removing And Installing, Hybrid Vehicles: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
If the trim clamps remain in the body mounting points, remove them and insert them in the trim.
Check clamps for damage or deformation, replace if necessary.
-- Push on the rear cross panel trim until it engages audibly and stretch the lip of the rear lid seal over the rear cross panel trim.