LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Interior Trim) >> 70 Interior Trim >> Luggage Compartment Trim Panels >> Gap Cover, Removing And Installing >> Gap Cover, Removing And Installing, Vehicles With A Retaining Track >> Removing

Gap Cover, Removing And Installing, Vehicles With A Retaining Track: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Gap Cover (Vehicles With A Retaining Track)
GWWA70-11044Courtesy of AUDI OF AMERICA, LLC

-- Remove the front luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING, NON-HYBRID VEHICLES .

-- Remove the dirt shield, if applicable.

-- Remove the retaining track. Refer to RAIL, REMOVING AND INSTALLING .

-- Move the front gap cover -1- to the rear -arrow-, disengage it and remove.