Bumper And Glove Compartment Mount Assembly Overview

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Impact Absorber And Glove Compartment Bracket Overview

Courtesy of AUDI OF AMERICA, LLC

Central Tube
Bolt
- 9 Nm
Right Retainer
- For the glove compartment
- Market-specific
- Removing and installing. Refer to GLOVE COMPARTMENT MOUNT, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Left Retainer
- For the glove compartment
- Equipment level
- Removing and installing. Refer to GLOVE COMPARTMENT MOUNT, REMOVING AND INSTALLING .
Bolt
- 9 Nm
- Quantity: 2
Grommet
- Mounted on the impact absorber, refer to -item 9-
Bolt
- Tightening Specification. 30 Nm +90° .
Right Shock Absorber
- Market-specific
- Removing and installing. Refer to BUMPER, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Bolt
- 9 Nm
Left Shock Absorber
- Market-specific
- Removing and installing. Refer to BUMPER, REMOVING AND INSTALLING .
Bolt
- 9 Nm
- Quantity: 2