TIPTRONIC Switch, Removing And Installing, Through My 2012: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver airbag, refer to OVERVIEW - DRIVER SIDE AIRBAG .

-- Disconnect trim ring from steering wheel.

-- Slide multifunction button -2- out of steering wheel in direction of -arrow-.

Fig 1: Identifying Harness Connector And Slide Button

Courtesy of AUDI OF AMERICA, LLC

-- Rotate multifunction button.

-- Disconnect the connector -2- from the multifunction button -1-.

Fig 2: Identifying Harness Connector And Tiptronic Switch At Multi-Function Button

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove Tiptronic switch to the rear.

Fig 3: Identifying Bolt And Tiptronic Switch, Removal

Courtesy of AUDI OF AMERICA, LLC