LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 608 (Wiring) >> 97 Wiring >> Control Modules >> Garage Door Opener Control Module, Removing And Installing >> Garage Door Opener Control Module -J530-, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 >> Removing

Garage Door Opener Control Module -J530-, REMOVING AND INSTALLING, VEHICLES FROM MY 2013: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Garage Door Opener Control Module -J530- (From MY 2013)
GWWA96-10995Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover, refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Release the tab -4- -arrow- and remove the control module -2- from the mount -3-.

-- Disconnect the connector -1-.

scientia non olet · About LEMON Manuals