Recirculation Door Motor -V113-, REMOVING AND INSTALLING: Notes
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the basic setting for the A/C system after installing the actuator using the Vehicle Diagnostic Tester in the "Guided Fault Finding " function.
Via the functions "Output diagnostic test mode" and "Basic setting", the activation of A/C system electrical components can be tested if necessary (for example, allocation test) using the Vehicle Diagnostic Tester in the "Guided Fault Finding " function.
In the event of problems with moisture in passenger compartment, additionally check recirculation door (must close completely).