Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the passenger seats as far back as possible.
-- Turn off the ignition.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Disconnect the connector -A- and -B-.
-- Remove the bolts -C-.
WARNING:
The heat sink on Fresh Air Blower Control Module -J126- may be hot.
-- Remove the Fresh Air Blower Control Module -J126- -D- from the air intake housing.