Starter, Removing And Installing, Vehicles With 2.0L TDI Engine And Manual Transmission: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to OVERVIEW - STARTER .
Install in reverse order of removal. Note the following:
CAUTION:
There is a risk of damaging the starter.
- To tighten the bolt -2-, insert the spacer sleeve -arrow- between the starter and transmission.
-- Install the engine support and the right engine mount .
-- Install the turbocharger support .
-- Install the particulate filter . Install the front exhaust pipe .
-- Install the tower brace, refer to TOWER BRACE, REMOVING AND INSTALLING .
-- Connect the battery. Required actions, refer to BATTERY, DISCONNECTING AND CONNECTING .