Ribbed Belt Pulley Without Freewheel, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Turn the generator shaft counterclockwise to tighten.

-- Clip protective cap onto generator pulley.

Tightening specification

Component	Nm
Ribbed belt pulley to generator	65