Rear Seat, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
-- Vehicles with seat forward/back adjustment: move the rear seat all the way to the rear.
Left 2/3 Rear Seat:
-- Remove bolts -1, 2, 3 and 4-.
-- Unclip the cable coupling station -5- on the seat frame -arrow-, open the cover and disconnect the cable.
Right 1/3 Rear Seat:
-- Remove bolts -1, 2, 3 and 4-.
-- Unclip the cable coupling station -5- on the seat frame -arrow-, open the cover and disconnect the cable.
Continued for both sides:
-- Versions with heated seats: Free up the connector on the seat frame for the seat heating.
-- Fold the rear seat backrest forward and, with a second technician, lift the rear seat out of the vehicle.