Overview - Rear Seat Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In the illustration is 2/3 left rear seat is shown.

Fig 1: Overview Of Rear Seat Backrest (2/3 Left Rear Seat Is Shown)

Courtesy of AUDI OF AMERICA, LLC

Upper Cable
- For the backrest release
- Removing and installing. Refer to UPPER CABLE, REMOVING AND INSTALLING .
Seat Frame
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Lower Cable
- For the backrest release
- Removing and installing. Refer to LOWER CABLE, REMOVING AND INSTALLING .
Bolt
- 36 Nm
- Quantity: 2
Bolt
- Tightening specification. 40 Nm
Rear Center Belt Latch
- Removing and installing. Refer to REAR SEAT BELT LATCH IN CENTER SEATING POSITION, REMOVING AND INSTALLING .
Shaft
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Rear Seat Backrest
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Rear Center Belt Anchor
- Removing and installing. Refer to REAR SEAT BELT ANCHOR IN CENTER SEATING POSITION, REMOVING AND INSTALLING .
Bolt
- Tightening specification 40 Nm
Bolt
- 36 Nm
- Quantity: 2
Bolt
- 36 Nm
Cover
- For the rear seat backrest
- Removing and installing. Refer to OUTER COVER, REMOVING AND INSTALLING .
Bolt
- 3.8 Nm