Backrest Lock Adjustment Actuator, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the release lever -1- and release the rear seat backrest.
-- Hold the release lever pulled and remove the screw -3-.
-- Pry the backrest release actuator -2- out of the trim using the Trim Removal Wedge 3409 -arrow- and remove it.
-- Unclip the cable on the backrest release actuator.
-- Disengage the cable ball studs and remove the backrest release actuator.