LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Depth Adjuster, Removing And Installing >> Removing

Seat Depth Adjuster, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture VAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the trim. Refer to SEAT DEPTH ADJUSTOR TRIM, REMOVING AND INSTALLING .

-- Versions with a storage compartment: Remove the storage compartment. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the seat depth adjuster as far as the stop.

-- Disengage the retaining tabs -arrow A- and -arrow B- on the upholstery -1-.

Fig 1: Identifying Support With Seat Cushion And Seat Cover
GWWA72-10708Courtesy of AUDI OF AMERICA, LLC
NOTE:

The illustration shows the upholstery disengaged.

-- Remove the cover with the upholstery upward.

-- Disengage the tabs -arrow C- from seat depth adjustment base plate -2-.

-- Fold the upholstery upward.

-- Remove the bolts -1- on the seat depth adjustment base plate -2-.

Fig 2: Removing Bolts On Seat Depth Adjustment Base Plate
GWWA72-10710Courtesy of AUDI OF AMERICA, LLC

-- Unclip the retaining tabs -arrow A-.

Fig 3: Unclip Retaining Tabs
GWWA72-10709Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat depth adjustment base plate upward from seat pan -1-.

-- Disengage the tabs -arrow B- from the seat pan.

-- Disengage the sides and back of seat cover -2- -arrows- on seat depth adjustment base plate -1-.

Fig 4: Disengaging Sides And Back Of Seat Cover On Seat Depth Adjustment Base Plate
GWWA72-10712Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat depth adjustment base plate from the front seat.

scientia non olet · About LEMON Manuals