Seat Depth ADJUSTOR Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture VAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Versions with a storage compartment: Remove the storage compartment. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .

-- Pry the clips -arrows- (quantity: 4) out at the trim -2-.

Fig 1: Installation Is Reverse Of Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the trim from the seat depth adjustment base plate -1-.

NOTE:

Ignore -item 3-.