Overview - Seat Angle Adjuster
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Handle
- For seat inclination adjustment
- Removing and installing. Refer to SEAT ANGLE ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
- Clip
- Replace the seat angle adjustment handle each time it is removed
- Installed position, refer to INSTALLING - The springs -arrows- (quantity: 2) on the clip -2- must be on the inner side of the lever -1-.
- Bolt
- 6.5 Nm
- Self-locking
- Always replace if removed
- Clean the threaded hole with a thread tap.
- Shoulder Pin
- 6 Nm
- Self-locking
- Always replace if removed
- Threaded hole for shoulder pin must be cleaned, for example, with thread cutter
- Seat Angle Adjustment
- Removing and installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .