Overview - Front Folding Passenger Seat
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Seat Side Sill Panel Trim
- Overview. Refer to OVERVIEW - SILL AND TUNNEL SIDE TRIM, FRONT PASSENGER SIDE FOLDING SEAT .
- Seat Height Adjuster
- Overview. Refer to OVERVIEW - SEAT HEIGHT ADJUSTER .
- Release Handle
- For the backrest
- Overview. Refer to OVERVIEW - SILL AND TUNNEL SIDE TRIM, FRONT PASSENGER SIDE FOLDING SEAT .
- Headrest
- Overview. Refer to OVERVIEW - HEADREST .
- Front Folding Seat
- Only passenger side
- There is no separation between the upper and lower frame on the passenger folding seat.
- Removing and installing. Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Seat Side Trim on the Tunnel side
- Overview. Refer to OVERVIEW - SILL AND TUNNEL SIDE TRIM, FRONT PASSENGER SIDE FOLDING SEAT .
- Seat Belt Latch
- Overview. Refer to OVERVIEW - FRONT SEAT BELT LATCH .
- LATCH Child Seat Anchorage
- Equipment levels
- Overview. Refer to OVERVIEW - FRONT CHILD SEAT ANCHORS .
- For checking after an accident, refer to CHILD SEAT ANCHORS, CHECKING AFTER A COLLISION .
- Handle
- for seat forward/back adjustment
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
- Drawer
- Equipment levels
- Overview. Refer to OVERVIEW - DRAWER .
- Bolt
- Quantity: 4
- 50 Nm
- Cover
- For the seat rail
- Removing and installing. Refer to SEAT RAIL COVER, REMOVING AND INSTALLING .
- Connector
- With a corrugated tube for the modular wiring routing
- Modular Wiring Routing Assembly Overview, refer to OVERVIEW - MODULAR WIRING ROUTING