Overview - Front Backrest, Passenger Folding Seat
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- Running from the side airbag to the connector station.
- Depending on optional equipment, there may be more wiring harnesses, such as for seat heating.
- Bolts
- 33 Nm
- Quantity: 4
- Self-locking
- Always replace if removed
- Threaded holes for screws must be cleaned, for example, with thread cutter
- Headrest
- Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING .
- Backrest
- Removing and installing. Refer to BACKREST, REMOVING AND INSTALLING, PASSENGER FOLDING SEAT .
- Side Backrest Cover
- Removing and installing. Refer to SIDE BACKREST COVER, REMOVING AND INSTALLING .
- Lower Seat Frame