Front Backrest, Assembly Overview, Standard Seat/Comfort Seat/Sport Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Front Backrest, Standard Seat/Comfort Seat/Sport Seat

Courtesy of AUDI OF AMERICA, LLC

Lower Seat Frame
- There are different versions. Allocate correct components.
Bolts
- 33 Nm
- Self-locking
- Always replace if removed
- Threaded holes for screws must be cleaned, for example, with thread cutter
Backrest
- There are different versions. Allocate correct components.
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, STANDARD SEAT/COMFORT SEAT/SPORT SEAT .
Headrest
- Overview. Refer to OVERVIEW - HEADREST .
Wiring Harness
- Running from the side airbag to the connector station.
- Depending on optional equipment, there may be more wiring harnesses, such as for seat heating, lumbar support
Bolts
- Self-locking
- Always replace if removed
- Threaded holes for screws must be cleaned, for example, with thread cutter
- 33 Nm

Fig 2: Identifying DVD Player Retaining Plate

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the retaining plate screws -2- to 6 Nm.

Fig 3: Identifying Retaining Plate -3-

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nut -2- to 0.4 Nm.