Overview - Backrest Adjustment Motor
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The backrest frame is illustrated without the cushion, cover and seat.
- Backrest Frame
- Nut
- 6 Nm
- Replacing
- Washer
- Shaft
- Clean the thread with a thread tap before installing the nut -2-.
- Apply Liquid Locking FluidD 000 600 A2 to the threaded section of the shaft before installing the nut
- Bolt
- 8 Nm
- Replacing
- Insert the new bolts with Liquid Locking FluidD 000 600 A2 (only for service)
- Backrest Adjustment Motor
- Driver side: Driver Backrest Adjustment Motor -V45-
- Front passenger side: Front Passenger Backrest Adjustment Motor -V46-
- Removing and installing. Refer to BACKREST ADJUSTMENT MOTOR, REMOVING AND INSTALLING .