LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Height Adjustment Motor, Removing

Height Adjustment Motor, Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before removing the seat height adjustment motor, check the electric and electronic components as well as the wiring to prevent any unnecessary repair costs. Refer to appropriate SYSTEM WIRING DIAGRAM.

Remove if the seat height adjustor motor is faulty

WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture VAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Disconnect the connector -4- from the seat height adjustment motor.

Fig 1: Disconnect Connector -4- On Seat Height Adjustment Motor
GWWA72-10999Courtesy of AUDI OF AMERICA, LLC

-- When removing the screw -6- a second technician must push down on the seat via the backrest.

-- Remove the screws -2 and 5- and remove the seat height adjustor motor -3-.

-- Remove the locking nut -arrow-.

-- Rotate the spindle -1- backward until the screw -7- is accessible.

-- Remove the screw -7- for the spindle nut and remove the nut.

Installing

WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Install the seat height adjustor motor. Refer to Installing .