Driver/Front Passenger Seat Lumbar Support Adjustment Switch -E176- / -E177-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove the seat side sill panel trim.
- Front seat manual. Refer to SILL SIDE TRIM, REMOVING AND INSTALLING, STANDARD/SPORT MANUAL SEATS .
- Front seat power. Refer to SILL SIDE TRIM, REMOVING AND INSTALLING, STANDARD, COMFORT SEAT, SPORT SEAT POWER SEATS .
-- Disconnect the connector -4-.
-- Remove the bolts -2-.
-- Remove the lumbar adjustment switch -1- from the trim -3-.