LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Drawer Mount, Removing And Installing >> Removing

Drawer Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drawer Mount
GWWA72-10986Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat side sill panel trim bracket. Refer to SILL SIDE TRIM, REMOVING AND INSTALLING, STANDARD/SPORT MANUAL SEATS .

-- Move the seat all the way to the rear and raise it.

-- Carefully push the right and left release tab -3- toward the outside with a screwdriver and remove the drawer -1- from the mount -2-.

-- Remove the bolts -arrows-.

-- Disengage and remove the drawer mount form the retainers in the seat pan frame.