DVD Player, Retaining Plate Internally Threaded Pop Rivet, Riveting To Backrest Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Pop Rivet Nut Pliers VAS5073A

Procedure

Fig 1: Identifying Internally Threaded Pop Rivet Pliers VAS 5073

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat backrest cover and cushion:

Standard seat and Sport seat (manual or power) and Comfort seat. Refer to BACKREST COVER AND UPHOLSTERY, REMOVING AND INSTALLING, STANDARD, COMFORT, SPORT SEAT .
Folding seat. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, FOLDING SEAT .

-- Insert the M6 threaded pin -item 1- into the Pop Rivet Nut Pliers VAS5073A and install internally threaded pop rivet -2- all the way.

-- Insert the pop rivet all the way into the hole in backrest frame -3- and then compress it with the pop rivet pliers.

-- Remove the threaded pin with the pop rivet pliers one more time.

-- Install the retaining plate for the DVD player. Refer to DVD PLAYER RETAINING PLATE, REMOVING AND INSTALLING .