DVD Player Retaining Plate, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Pull washer -3- up and slide socket -4- from the side into mount -1-.

The socket must fit in the center of the mount.

-- Hold the socket in this position and tighten the nut.

-- Install the retaining plate hooks into the backrest frame -3- -arrows-.

Fig 1: Identifying Tightening Specification, Retaining Plate For DVD Player

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts.