Secondary Air Injection (AIR), component overview: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Secondary Air Injection (AIR) Pump Motor V101
- Component location Component location of under Component location of Secondary Air Injection (AIR) Pump Motor V101
- Removing and installing → Secondary Air Injection (AIR) pump, removing and installing
2 - Secondary Air Injection (AIR) Pump Relay J299
- Component location → Component location for Secondary Air Injection (AIR) Pump Relay J299
3 - Motronic engine control module J220
4 - Right combination valve for Secondary Air Injection (AIR)
- Component location Secondary Air Injection (AIR) combi-valve
- Checking → Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Removing and installing → Right combination valve for Secondary Air Injection, removing and installing
5 - Secondary air injection (AIR) solenoid valve N112
- Component location → Installation location of Secondary Air Injection (AIR) Solenoid Valve N112
6 - Non-return valve
- Installed location: - Arrow - points in direction of flow, as shown in Fig 1.
7 - To Intake manifold
8 - Left combination valve for Secondary Air Injection (AIR)
- Component location Secondary Air Injection (AIR) combi-valve
- Checking → Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Removing and installing → Left combination valve for Secondary Air Injection, removing and installing
9 - Vacuum reservoir
- Component location: In left front wheel housing behind wheel housing liner