LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (4.2L - Engine Mechanical, Engine Code(S): BHF) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Oil Pressure Switch F1 , removing and installing

Oil Pressure Switch F1 , removing and installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Removing 

Fig 1: Removing Rear Engine Cover
GW00017835Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Disconnecting Electrical Harness Connector From Oil Pressure Switch
GW00018280Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing 

Installation is in reverse order of removal, note the following:

NOTE:
  • Replace seal.

Torque specifications 

Component Nm
Oil pressure switch to oil filter housing 25
scientia non olet · About LEMON Manuals