Installing guide frame
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Replace bolts - 1 to 20 -.
- Tighten bolts for guide frame as follows:
- Tighten bolts - 1 to 10 - to 30 Nm with torque wrench.
- Tighten bolts - 11 to 20 - to 20 Nm with torque wrench.
- Tighten bolts - 1 to 10 - to 50 Nm with torque wrench.
- Tighten bolts - 11 to 20 - to 30 Nm with torque wrench.
- Tighten bolts - 1 to 10 - 90 ° (1 /4 additional turn) using a rigid wrench.
- Tighten bolts - 11 to 20 - 90 ° (1 /4 additional turn) using a rigid wrench.
- Tighten bolts for sealing surfaces of cylinder block/guide frame - dark hatching in the illustration - to 9 Nm in diagonal sequence.