LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (4.2L - Engine Mechanical, Engine Code(S): BHF) >> 13 - Engine - Crankshaft, Cylinder Block >> Belt pulley side, servicing >> Ribbed belt, removing and installing >> Removing

Ribbed belt, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed direction of rotation can cause damage to the belt under operating conditions.
Fig 1: Locating Tensioning Bolt And Ribbed Belt
GW00018135Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals