LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (3.2L - Ignition System - Engine Code(S): CALB (As Of 11.2008)) >> Ignition System >> Removal And Installation >> Engine Speed Sensor -G28- >> Removing

Engine Speed Sensor -G28-: Removing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove noise insulation, to do this loosen mounting parts -1, 2, 3-.

Fig 1: Identifying Noise Insulation Components
GWWA10-10624Courtesy of AUDI OF AMERICA, LLC

-- Disconnect electrical connector -2-.

Fig 2: Locating Engine Speed (RPM) Sensor -G28-
GWWA28-10011Courtesy of AUDI OF AMERICA, LLC

-- Remove bolt -1- and engine speed sensor -G28-.

scientia non olet · About LEMON Manuals