LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 591 (Self-Leveling Suspension (Sedan)) >> 43 Self-Leveling Suspension >> Electronic Damping >> Electronic Damping Control Module -J250-, REMOVING AND INSTALLING >> Removing

Electronic Damping Control Module -J250-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Electronic Damping Control Module
GWWA40-10250Courtesy of AUDI OF AMERICA, LLC

The Electronic Damping Control Module -J250- is located behind the right luggage compartment side trim panel.

-- Turn off all electrical consumers.

-- Remove the key.

-- Remove the cover from the right luggage compartment storage compartment.

-- Release and disconnect the connector -3-.

-- Press the clips -2- to the side and remove the Electronically Controlled Damping Control Module -J250- -1-.