LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 591 (Self-Leveling Suspension (Sedan)) >> 43 Self-Leveling Suspension >> Dynamic Ride Control (DRC) >> Electronic Damping Control Module -J250-, REMOVING AND INSTALLING >> Removing

Electronic Damping Control Module -J250-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Electronic Damping Control Module
GWWA43-10183Courtesy of AUDI OF AMERICA, LLC

-- Turn off all electrical consumers.

-- Remove the key.

-- Remove the cover from the right luggage compartment storage compartment.

-- Remove the nut -arrow-.

-- Disconnect the connectors -2 through 4- from the control module.

-- Remove the control module -1-.