LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Final Drive, Differential - Automatic Transmission 0B6 (Coupe)) >> 39 Final Drive, Differential >> Specifications >> Fastener Tightening Specifications >> Front Final Drive Cover - Tightening Specifications And Sequence

Front Final Drive Cover - Tightening Specifications And Sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Pre-tighten the bolts -1- and -2- to 3 Nm.

Fig 1: Identifying Front Final Drive Cover - Tightening Sequence
GWWA39-0375Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 23 Nm in the following sequence: -1 through 11-.

scientia non olet · About LEMON Manuals