Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Engine oil is drained. Refer to ENGINE OIL, EXTRACTING AND REPLACING OIL FILTER .
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -2-.
-- Remove the nuts -1- and the Oil Level Thermal Sensor -G266- -3-.