Engine Oil Cooler, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of scalding due to hot steam and hot coolant.
- The coolant system is under pressure when the engine is warm.
- Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the auxiliary components bracket. Refer to AUXILIARY COMPONENTS BRACKET, REMOVING AND INSTALLING .
-- Remove the bolts -4 and 5- and remove the engine oil cooler -3- together with the seal -2-.