Seat Belt Height Adjuster, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Belt Height Adjuster -4-

Courtesy of AUDI OF AMERICA, LLC

-- Press belt height adjuster button and bring height adjuster slide into lowest position.

-- Remove the upper B-pillar trim panel. Refer to B-PILLAR TRIM PANEL, REMOVING AND INSTALLING, UPPER B-PILLAR TRIM PANEL .

-- Move the upper B-pillar trim to the side with the seat belt still threaded through it.

-- Remove the bolt -3-.

-- Remove belt relay -2- with belt webbing -1-.

-- Remove the bolt -5-.

-- Pull seat belt height adjuster -4- up and out of the B-pillar.