Rear Outer Belt End Fitting, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.
- The cut-out on the bolting surface of the seat belt latch must be above the pin on the floor panel.