LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Passenger Protection, Airbags, Seat Belts (Sedan)) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Front Belt End Fitting, Removing And Installing >> Removing

Front Belt End Fitting, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Belt Relay Cover, Removal
GWWA69-10378Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward.

-- Unclip the cover -1- on the belt relay -arrows- and fold it up.

Fig 2: Identifying Three-Point Seat Belt, Removal
GWWA69-10762Courtesy of AUDI OF AMERICA, LLC
CAUTION:
  • The spring -2- will get bent if it is removed incorrectly. Replace the three-point seat belt if the spring gets bent.
  • Move the spring -2- just far enough until it is possible to unlock the tab on the spring.

-- Release the spring catches -2- by inserting a small screwdriver in the opening in the spring -arrow-.

-- Slide the belt end fitting -3- downward and disengage at the pin -1-.

scientia non olet · About LEMON Manuals