Center Cushion, Removing And Installing, Backrest With Pass-Through: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Fold the internal padding -1- down and guide the retaining hooks -2, 3 and 4- into the retainers -5 and 6- and into the opening -7-.
-- Press the bottom side of the internal padding onto the clips -arrows- on the pass-through cover.
-- If the internal padding cannot be pressed on, carefully press the clips in using a screwdriver until the padding engages in the retainer.