LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Seat Upholstery & Covers (Sedan)) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing >> Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing, RS Bucket Seat >> Installing

Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing, RS Bucket Seat: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Align new heating element on backrest surface, remove protective foil and glue new heating element to same positions as old heating elements.

-- Route connecting wires to backrest bolsters through openings in seat cushion without crossing.

scientia non olet · About LEMON Manuals