Backrest Heating Element -Z7- / -Z9-, Removing And Installing, Comfort Seat: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cover and the backrest cushion, refer to BACKREST COVER AND PADDING, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
-- Disconnect the cover from the padding. Refer to BACKREST COVER AND PADDING, SEPARATING, STANDARD SEAT/SPORT SEAT .
-- Cut the wire -1- off directly at the old lower backrest heating element -2-.
-- Cut through the connecting bars and wires -arrows-.
-- Carefully loosen the top and bottom of the backrest heating element -C- and -D- and remove.
NOTE:
The spacer fabric must not be damaged.
The heating elements -A- and -B- remain on the backrest bolsters and the new backrest heating element is bonded over them.