Seat Bench/Single Seat, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Latch Bracket Cover Caps

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seats as far forward as possible.

-- Remove the LATCH child seat anchor cover (quantity: 4) -1- from the anchors -2-.

-- Reach under the seat bench frame with both hands on one side of the seat -arrows A-.

Fig 2: Inserting Bench Seat And Press Wire Frame "Firmly" Into Grommets

Courtesy of AUDI OF AMERICA, LLC

-- Pull bench seat -1- up forcefully with both hands -A arrows- so that wire hooks -2- disengage from mounting grommet -3-.

-- Repeat the procedure on the other side -B arrows-.

-- Vehicles with seat heating: disconnect the seat heating connector

-- Remove the bench seat from the vehicle.